Produkt zum Begriff Verformbarkeit:
-
Raue, Benjamin: Act on Copyright Content Sharing Service Providers
Act on Copyright Content Sharing Service Providers , The Book The Urheberrechts-Diensteanbieter-Gesetz (UrhDaG) is the German implementation of the controversial Art. 17 Directive 2019/790 (Copyright in the Digital Single Market, DSDM). Germany has decided against a minimum effort implementation and resisted the temptation to just incorporate the wording of the Directive more or less literally into the German Copyright Act (UrhG). Instead, it has opted for a comprehensive implementation in a stand-alone act, including: an extensive definition of an OCSSP with a safe-harbour clause for excluded service providers a detailed provision specifying the obligation to acquire contractual rights of use several provisions on direct remuneration for authors, performers and photographers very detailed provisions balancing between the obligation to preventively block copyright infringing material and the users' rights to freedom of expression and information which more or less anticipated (and likely influenced) the CJEU's decision Poland/Parliament and Council, including a section on uses presumably authorised by law a redress system consisting of complaints procedures and an alternative dispute resolution mechanism detailed obligations for measures against abuse rights of information for rightholders and for the purpose of scientific research The commentary of each article is headed by the current version of the article both in the German original and an English translation followed by a clearly and uniformly structured analysis of the provision including the extensive (academic) discussion that accompanied the implementation procedure. The interplay of the UrhDaG with the German Copyright Act is addressed as well as the respective requirements of the DSMD. The impact of the CJEU's first decision on Art. 17 DSDM (Poland/Parliament and Council) is discussed in the relevant provisions. As Art. 17 DSDM has been implemented very heterogeneously in the Member States, further decisions of the CJEU are to be expected. The detailed German implementation might serve as a reference and source of inspiration for the further specification of Art. 17 DSDM. The commentary aims to meet the expectations both of German and foreign lawyers interested in platform regulation and copyright by providing a detailed explanation both of the German implementation and, by that, of Art. 17 DSMD. The Advantages at a Glance Article-by-Article Commentary in English language clearly and uniformly structured analysis of each provision The Target Group For German and foreign Copyright lawyers. , Bücher > Bücher & Zeitschriften
Preis: 90.00 € | Versand*: 0 € -
Writing for the Web: Creating Compelling Web Content Using Words, Pictures, and Sound
With Writing for the Web, you’ll learn everything you need to know to create effective Web content using words, pictures, and sound. Follow along as instructor and writer Lynda Felder combines easy-to-follow guidelines with photographs, lists, and tables to illustrate the key concepts behind writing nonlinear, interactive stories; creating succinct and clear copy; and working compelling images, motion graphics, and sound into your content. Many books offer instruction on how to use software programs to build Web sites, podcasts, and illustrations. But only Writing for the Web explains when and why an author might choose an illustration over a photograph, motion graphics over text, or a slice of Beethoven’s Fifth over the sound of a bubbling brook. Focusing on storytelling techniques that work best for digital media, this book describes the essential skills and tools in a Web author’s toolbox, including a thorough understanding of grammar and style, a critical eye for photography, and an ear for just the right sound byte for a podcast. This clearly written guide provides a fun and practical approach to Web writing that busy students and writers will be eager to learn and explore. Uses concise, straight-to-the-point style to illustrate techniques for writing sharp and focused Web copy, coupled with compelling visuals and sound Focuses on writing practices and guidelines, with exercises and prompts developed and tested by the author Features clear design, with plenty of pictures and visual elements, and a friendly and knowledgeable voiceTake your learning even further with Lynda's companion book: The Web Writer's Toolkit: 365 prompts, collaborative exercises, games, and challenges for effective online content.For more tips, exercises, and suggestions for teachers, check out the book’s Web site at www.write4web.com.
Preis: 18.18 € | Versand*: 0 € -
Publishing Python Packages
Create Python packages to share your code in a scalable and maintainable way. Improve team productivity, publish helpful libraries, or even start your own open source project following the latest Python packaging standards.In Publishing Python Packages you will learn how to:Build extensions and console script commandsUse tox to automate packaging, installing, and testingBuild a continuous integration pipeline using GitHub ActionsImprove code quality and reduce manual review using bandit, black, mypy, and radonCreate published documentation for your packagesKeep packages up to date with pyupgrade and DependabotFoster an open source community using GitHub featuresPublishing Python Packages teaches you how to easily share your Python code with your team and the outside world. Learn a repeatable and highly automated process for package maintenance that's based on the best practices, tools, and standards of Python packaging. Whether you're entirely new to Python packaging or looking for optimal ways to maintain and scale your packages, this fast-paced and engaging guide is for you.about the technologyPython packages are a great way to share your code and give a productivity boost to your colleagues and community. Whether you're reusing your code internally or contributing to open source, a properly automated system of packaging will save you from time-consuming manual maintenance.about the bookPublishing Python Packages reveals best practices and standards for packaging your Python code in an easy, automated, and scalable way. The book walks you through creating a complete package, including a C extension, and guides you all the way to publishing on the Python Package Index. You'll get hands-on experience with the latest packaging tools, and learn the ins-and-outs of package testing and continuous integration. You'll even learn how to set up a successful open source project, including licensing, documentation, and nurturing a community of contributors.
Preis: 47.07 € | Versand*: 0 € -
Sharing
Preis: 73 € | Versand*: 0.00 €
-
Was sind die wichtigsten Faktoren, die die Verformbarkeit eines Materials beeinflussen?
Die wichtigsten Faktoren, die die Verformbarkeit eines Materials beeinflussen, sind die Art der Bindungen zwischen den Atomen oder Molekülen im Material, die Temperatur und die Spannung, die auf das Material ausgeübt wird. Je stärker die Bindungen im Material sind, desto weniger verformbar ist es. Eine höhere Temperatur kann die Verformbarkeit erhöhen, da die Bewegung der Atome oder Moleküle erleichtert wird, während eine höhere Spannung das Material verformen kann, wenn die Belastungsgrenze überschritten wird.
-
Was ist Plastizität und wie beeinflusst sie die Verformbarkeit von Materialien?
Plastizität ist die Fähigkeit eines Materials, dauerhaft verformt zu werden, ohne zu brechen. Sie wird durch die Bewegung von Atomen oder Molekülen in einem Material ermöglicht. Je höher die Plastizität eines Materials ist, desto besser kann es verformt werden, ohne zu versagen.
-
Was sind die verschiedenen Faktoren, die die Verformbarkeit von Materialien beeinflussen?
Die Verformbarkeit von Materialien wird durch Faktoren wie die Art des Materials, die Temperatur und den Druck beeinflusst. Zusätzlich spielen auch die Kristallstruktur, die Reinheit des Materials und die Geschwindigkeit der Verformung eine Rolle. Je nach Kombination dieser Faktoren kann ein Material entweder leicht verformbar oder sehr widerstandsfähig gegen Verformung sein.
-
Was sind die wichtigsten Faktoren, die die Verformbarkeit von Materialien beeinflussen?
Die wichtigsten Faktoren, die die Verformbarkeit von Materialien beeinflussen, sind die Temperatur, die Spannung und die Struktur des Materials. Eine höhere Temperatur führt zu einer erhöhten Verformbarkeit, während eine höhere Spannung die Verformbarkeit verringern kann. Die Kristallstruktur des Materials bestimmt auch, wie leicht es verformt werden kann.
Ähnliche Suchbegriffe für Verformbarkeit:
-
Content Marketing: Think Like a Publisher - How to Use Content to Market Online and in Social Media
If you have a website, a blog, or even a Facebook or Twitter presence, you are a publisher. Think like one: build a digital content strategy that embraces words, images and multimedia to systematically enhance consumer engagement and conversion rates. In Content Marketing, world-renowned digital content expert Rebecca Lieb offers all the detailed, actionable guidance you'll need. Lieb guides you through planning what you'll say online, how and where you'll say it, how often you'll communicate, and how you'll measure your effectiveness. She offers practical guidance for "listening" to conversations about your brand, products, and services, responding more effectively, and effectively informing those conversations. You'll learn how to use your digital content strategy to shape marketing, branding, PR, SEO, customer and media relations, blog content, social media initiatives, and of course, your website. Lieb drills down to offer detailed, actionable advice for issues such as choosing distribution channels making sure you don't run out of things to say making your content "findable" promoting two-way dialogue. Using her techniques, you can market far more effectively and personally build loyalty as you inform and entertain customers and reduce or even eliminate advertising costs. Think about it: why buy media when, today, you are the media?
Preis: 16.04 € | Versand*: 0 € -
Hotel Sharing
Preis: 58 € | Versand*: 0.00 € -
Website X5 Go
Produktbeschreibung: Incomedia Website X5 Go Einführung Incomedia Website X5 Go ist die ultimative Lösung für alle, die ihre eigene Website mit minimalem Aufwand und maximaler Kreativität erstellen möchten. Es bietet eine intuitiv verständliche Benutzeroberfläche und eine Vielzahl von Funktionen, die es einfach machen, eine professionelle Website von Grund auf neu zu erstellen. Benutzerfreundlichkeit Der Hauptvorteil von Website X5 Go ist seine einfache Handhabung. Sie benötigen keine Programmierkenntnisse, um eine beeindruckende Website zu erstellen. Mit der Drag-and-Drop-Funktion können Sie Elemente einfach dort platzieren, wo Sie sie haben möchten, und das Endergebnis sofort sehen. Templates und Anpassungsfähigkeit Website X5 Go bietet eine breite Palette von Templates, die nach Branche und Design sortiert sind. Sie können zwischen Hunderten von professionell gestalteten Templates ...
Preis: 19.90 € | Versand*: 0.00 € -
Persuasive Writing
Developed from powerful techniques consistently proven in the world of multi-million pound commercial bid writing, Persuasive Writing reveals the most efficient and effective ways to make your words work, time after time. Discover how to: Transform any document into something truly compelling and persuasive Understand what your reader really wants to hear and use this to get what you want Combine logic and emotion to convince even the most sceptical reader Whether you're writing for business or for pleasure, the longest document or the shortest email, with these and many more proven techniques, Persuasive Writing will ensure every word works for you.
Preis: 12.83 € | Versand*: 0 €
-
Wie lässt sich die Verformbarkeit von Materialien für verschiedene Anwendungen nutzen?
Die Verformbarkeit von Materialien kann genutzt werden, um sie in verschiedene Formen zu bringen, die für spezifische Anwendungen benötigt werden. Durch gezielte Verformung können Materialien ihre mechanischen Eigenschaften verbessern, z.B. durch Kaltverfestigung. Dies ermöglicht es, Materialien für unterschiedliche Anwendungen wie Automobilbau, Bauwesen oder Elektronik anzupassen.
-
Welche Materialien oder Substanzen sind besonders verformbar und welche Faktoren beeinflussen ihre Verformbarkeit?
Metalle wie Aluminium und Kupfer sind besonders verformbar, da sie eine kristalline Struktur haben, die sich leicht verschieben lässt. Die Temperatur, die Geschwindigkeit der Verformung und die Reinheit des Materials beeinflussen die Verformbarkeit dieser Substanzen. Andere Materialien wie Glas oder Keramik sind hingegen spröde und brechen leicht, da sie keine kristalline Struktur haben.
-
Wie wirkt sich die Biegung von Materialien auf ihre Festigkeit und Verformbarkeit aus?
Die Biegung von Materialien kann ihre Festigkeit beeinträchtigen, da sie zu Spannungen führen kann, die das Material schwächen. Gleichzeitig kann die Biegung die Verformbarkeit des Materials erhöhen, da es in der gebogenen Form flexibler ist. Die genaue Auswirkung hängt jedoch von der Art des Materials und der Art der Biegung ab.
-
Wie kann Blogging dazu beitragen, die Sichtbarkeit einer Marke zu erhöhen und gleichzeitig eine engagierte Online-Community aufzubauen?
Blogging ermöglicht es einer Marke, regelmäßig relevanten und ansprechenden Content zu veröffentlichen, der die Aufmerksamkeit neuer potenzieller Kunden auf sich zieht. Durch die Verwendung von Keywords und SEO-Optimierung kann die Sichtbarkeit der Marke in den Suchmaschinenergebnissen erhöht werden. Gleichzeitig können Blogbeiträge die Interaktion mit der Zielgruppe fördern, indem sie Raum für Kommentare, Diskussionen und Feedback bieten. Durch die Bereitstellung von nützlichen Informationen und dem Aufbau einer Community um den Blog herum kann eine Marke Vertrauen und Loyalität bei ihren Kunden aufbauen.
* Alle Preise verstehen sich inklusive der gesetzlichen Mehrwertsteuer und ggf. zuzüglich Versandkosten. Die Angebotsinformationen basieren auf den Angaben des jeweiligen Shops und werden über automatisierte Prozesse aktualisiert. Eine Aktualisierung in Echtzeit findet nicht statt, so dass es im Einzelfall zu Abweichungen kommen kann.